Product Details
This kit has been created so that ANYONE can have a go at pottery. No pottery wheel is required. Just use it on a work station / table / bench. It’s a great idea for GIFT for someone creative. It can also be used with air dry clay.
This Starter Kit includes the following items:
1 x Pottery Workboard (400mm x 400mm x 6mm)
2 x 1/4 Inch deep Rolling Pin Guides (400mm x 50mm x 6mm)
2 x Small Rising Stars (To lift your work off the workbench when handling and working it).
Mix and Match 3 x Small Drape Forms of your choice from the list below. Finished with 45 degree chamfer edges (please select the 3 forms you would like using the selection boxes):
- 5″ Round
- 5″ Hexagonal
- 6.5″ Equilateral Triangle
- 4.5″ x 6.75″ Rounded Rectangle
- 4″ x 5″ Rectangle
- 4″ Square
How to use me
One fun way of using our drape forms is with a pad of medium-density upholstery foam (which you can buy online for around 10). Here’s a quick video showing you ‘How to use Hartley & Noble Drape Forms’. If you don’t have any foam, don’t worry… just skip the foam, and form the clay around the drape using your hands and a rib or old store card (as shown in the video).
More guidance..
– Wedge an over-sized tennis ball size piece of clay.
– Put your rolling pin guides on top of your workboard, and roll your clay in to a 1/4 inch thick and even slab.
– Take a soft silicone pottery rib and gently smooth your clay in one sweeping motion to get rid of any bubbles or marks.
– Put your drape form on top of the clay.
– Cut around your drape form (leaving a 1/2 inch or so excess around the drape).
– Gently flip the clay and the form over (so that the clay is now facing you).
– Put the form on one of your Rising Stars to lift it off your bench while you work on it.
– Gently press the clay all around on to the form, and then take your silicone rib and smooth the clay down. Then smooth the clay in an upwards direction (compress that clay!)
– Take a needle tool and trim around the form to create what will be the rim of your dish. Neaten up your rim.
– A small form like this should be left to dry for up to a couple of hours. Keep the Rising Star underneath to stop it from being damaged. Time taken to dry varies on climate and other factors. Do not let your clay dry completely or it will crack. Check on it every hour or so. When it is ready to be removed it will easily release from the form.
How to look after me
Please do not leave these products soaking in water as this can cause swelling and warping especially with the economy range of materials.
To clean just wipe with a damp sponge to remove any clay.
Do not stack together, please dry & store horizontally.
Do not use metal scourers or screwdrivers as this can damage the protective laminate layer, and cause damage to your items.
