The Hartley & Noble Throwing Grid - makes it easy to throw pots that are consistently the same height and width. You will need a H&N Batt System to use this product.
1 x H&N Throwing Grid
How to use
- Insert the H&N Throwing Grid into the Master Batt of your H&N Tile Batt System (compatible with all our Over-the-Wheel Systems, the Classic Russian System, or a Standard Batt System in 6mm thickness)
- Using the lines on the Throwing Grid, set your laser or height pointer gauge to the lines at the height and width that you want to throw your pot.
- Remove the grid and put a Hartley & Noble Tile Insert into your Batt System. Throw your pot on the tile, and stop when you reach the laser lines or height guide you have set.
- When you return to your wheel hours or even days later, simply set up your laser or height pointer gauge to the same height and width on the Throwing Grid. Continue throwing, knowing that your pieces will all be the same matching height and width.
Developed in collaboration with Joe Thompson @oldforgecreations.
Please take a look at the video below to see the Throwing Grid in action when being used with a Laser you can also use a height pointer gauge to set your parameters
This H&N Throwing Grid fits into the 150mm and 200mm size tile aperture of H&N Tile Batt Systems. Please select which tile size you require for your Throwing Grid. If you require a Tile Batt System you can find all of our Batt Systems by clicking here.
The Laser guide tool used in the video is shown below, just click on the image of the laser and it will take you to the Amazon page should you wish to buy one;
Laser Level, HYCHIKA 15M Self-Leveling Line Laser with Double Laser Module: