Bisque Tile Master Batt

Stock Status: In Stock
Your message can be up to a maximum of [option_max_length] characters.

Do you throw on bisque tiles?  Does your pottery wheel have batt pins? Then this system is perfect for you! Our Bisque Tile Master Batt is designed to fit your wheel and hold bisque tiles as well as our premium MDF tile inserts.  

This Bisque Master Tile Master Batt includes the following items:

- 1 x Master Batt manufactured using our 6mm Premium MDF. 

- The Master Batt is precision cut to hold your own 4 inch or 6 inch square, 6mm deep bisque tiles.

- We use our premium quality, water resistant MDF which is built to last, super smooth, and warp resistant.  

Would you like your Bisque Master Tile Batt to hold our premium MDF tile inserts too?  

Click here to add additional MDF tile inserts to fit your bisque tile master batt.. Select the tile size option that is the closest match to your bisque tiles.  If you cannot see your particular size listed, just enter it in the 'Bespoke Size' box, or tell us that you are sending in a tile you'd like us to use as a template.  

When ordering your Bisque Tile Master Batt, please measure the bisque tiles you intend to use with it.  As standard, we make this batt to fit 4 inch or 6 inch bisque tiles.  If your bisque tiles are a different size please just enter your tile size in the 'Bespoke Design' box and we will make your master batt to fit.  Alternatively you can also send us a sample of the tiles you use and we will manufacture your system to fit your tile perfectly.  We will return the tile to you with your new batt. 

Due to minor variations in the size of bisque tiles that are on the market, it may be necessary for you to carry out some hand finishing to ensure the perfect fit.  If you find your bisque tiles are slightly snug for your master batt, we recommend that you take a light grade sand paper, on a flat block, and gently, evenly, sand around each edge of the bisque tile until you achieve the desired fit in your master batt.  

Additional details:

Manufactured from our 6mm thick Premium MDF.
The diameter of the batt is made-to-measure according to the size you select when placing your order. 
Please measure your wheelhead using an accurate tape measure, taking the measurement straight through the centre of the wheel head.  For guidance please click here; Taking Your Wheelhead measurements
If your precise measurement is not listed in the options shown, please enter your measurements in the "Bespoke Design" box.  We will then use this information to cut you a bespoke master batt.

How to look after me:

Please do not leave your batt or tiles soaking in water.  Wood is a natural product and this could cause swelling or warping.
Dry vertically on the side. 
To clean, wipe with a damp cloth.  
Do not use abrasive scourers or scraping tools.

Bespoke Orders
Please note that if an order is placed with bespoke features, or a specific size is requested using the 'Bespoke Design' option, it will not be possible to offer any exchange products or refunds unless the items supplied are faulty or do not meet your ordered specification. 

Please be advised that we may choose to add any bespoke designs to our product catalogue at a later date.

  • Material:
    Premium MDF
  • Thickness:
  • Wheel Diameter:
  • Identifier Exists:
  • Edit Product Code:
  • Product Code:
  • Edit Product Manufacturing Category:
    Over-the-Wheel System
  • Product Manufacturing Category:
    Over-the-Wheel System
  • Brand:
    Hartley & Noble
  • Condition:
  • Weight:
Not yet reviewed
Write an online review and share your thoughts with other shoppers!
Be the first to review this product